Trolley type D metal fire extinguisher -30KG This is a very flammable liquid fire that can be well aligned with the liquid and then extinguished. It can go to the fire place by hand and can be used very efficiently.

1. the German secondary decompression technology is adopted to effectively prevent combustible metal dust flying and more dangerous dust explosion during the fire extinguisher spray.

2. the large-capacity storage pressure ensures that the remaining spray volume is minimized and the fire extinguishing efficiency is the highest.

3. Relying on the company's strong and professional fire extinguishing agent production and research and development capabilities, to ensure the independent research and development of Class D metal fire extinguishing agents, master the core technology and ensure the fire extinguishing effect.

4. The unique process formula overcomes the shortcomings of D-type fire extinguishing agents in other domestic manufacturers that are easy to agglomerate, and the fire extinguisher needs to be reversed several times to fight for the precious time.

5. Due to the wide disparity in the combustion characteristics of different metals, no D-type fire extinguishing agent can extinguish any metal fire. Our company can adjust the formula according to the characteristics of your combustible metal category to achieve targeted and effective fire suppression .

6. The fire extinguisher can be used under normal conditions. When a fire accident occurs, the fire extinguisher user has no time, and may not have objective conditions to wear protective clothing and goggles, and miss the best time to extinguish the fire.

7. ultra-pulverize the proportioning material to about 5um, which fully increases the contact area between the fire extinguishing agent and the burning free radicals. Its fire extinguishing effect is 6-10 times that of ordinary dry powder fire extinguishing agents (particle diameter of about 40um). Now, the so-called "magnetization" and "bio-nanotechnology" of D-type fire extinguishing agents on the market do not exist. In fact, it is easy to distinguish these. You only need to inspect the production enterprise whether there are D-type fire extinguishing agent production equipment and testing methods. Our company welcomes customers to visit and inspect.

1. Due to the complexity of metal burning, please choose the fire extinguishing agent carefully. If necessary, you can contact the manufacturer;

2. When any metal powder is extinguished by fire, the dust cannot be lifted up, otherwise a more dangerous dust explosion will be formed;

3. Frequently check the internal pressure of the fire extinguisher and find that the pointer of the pressure gauge is lower than the green zone and should be sent to the manufacturer for repair.

Class D fire extinguisher manufacturers specialize in the production of ABC ultra-fine dry powder fire extinguishing agents, dry powder fire extinguishing agents and other products with excellent quality. Years of manufacturing experience give you professional products.

Filling amount of fire extinguishing agent: 30KG

Filling inert gas pressure: 1.2Mpa

Operating temperature: -20 ~ 55 ℃

Hydrostatic test pressure: 2.5Mpa